魔板的制作
Making your own Master/Super Magic
It is possible to make Magic Master Edition, or a 'Super Magic' yourself, by recombining two normal Rubik's Magics. The first time this is quite difficult to do, and not for the faint-hearted. After you have done it once or twice it becomes easier, but it will always be a lot of hard intricate work.
I made a Super Magic by connecting one old magic (black) and one new magic (red). If you look at a normal magic in the starting position (unlinked rings), three tiles at one end of the reverse side will be correct. By connecting the two Magics at those ends, it will be possible to solve the resulting Super Magic. On the front, the red magic is on the left, and the black magic on the right, with the copyright messages of both of them along the bottom. When solved, the reverse shows two sets of 3 linked rings. You can of course connect two Magics of the same type but then one has to be upside down, i.e. with the copyright message along the top edge (red Magics: copyright along top right and bottom left; black Magics: copyright along top left and bottom right). Of course, if you replace the design with one of your own as explained later, then none of the above is relevant.
The magic is made up of tiles which are held together by many loops of the same size. If the string loops are removed, the tiles fall apart in two halves, and the paper inside bearing the design can be removed. You can therefore replace the design with one of your own by replacing the paper inserts. I have made fairly accurate drawings of the designs for the Create the Cube, Magic Rings and the Magic Balls. You can download them here:
Create the Cube: back, front, or MSWord document (511Kb).
Magic Balls: back, front, solved, or MSWord document (79Kb).
Magic Rings: back left half, back right half, front left half, front right half (about 200Kb each)
可以参照http://bbs.mf8-china.com/viewthread.php?tid=6929&extra=page%3D1
[ 本帖最后由 kexin_xiao 于 2009-8-11 20:33 编辑 ]